Plant Model
|
ANP 1000
|
ANP 1500
|
ANP 2000
|
||
---|---|---|---|---|---|
Plant capacity* | t/h |
80 |
120 |
160 |
|
Batch size | kg |
1000 |
1500 |
2000 |
|
Cycle time | seconds |
45 |
45 |
45 |
|
UNITS | |||||
Cold Feed Bins | No. of bins # |
4 |
4 |
4 |
|
Total capacity | m3 | 20 30 35 | |||
Feeding width | m |
2.5 |
3 |
3.6 |
|
Feeding height | m |
3.3 |
3.3 |
3.3 |
|
Drying Drum | Drive type | Chain | 4-wheel friction | ||
Dryer size (L x D) | m x m | 6.7 x 1.5 | 8 x 2.1 | 8 x 2.1 | |
Burner | Type | High pressure, fully automatic, modulating | |||
Fuel type# | Diesel / Furnace oil | ||||
Thermal capacity | MW |
6.4 |
7.6 |
13.9 |
|
Blower capacity (@ 20 C) | m3 / min |
150 |
250 |
300 |
|
Screening Unit | Screening method | Inclined linear vibration | |||
No. of decks |
4 |
4 |
4 |
||
Surface area (W x L) | m x m | 1.2 x 2.4 | 1.2 x 3.6 | 1.2 x 3.6 | |
Screening capacity | t/h |
100 |
140 |
180 |
|
Hot Aggregate Bins | No. of bins |
4 |
4 |
4 |
|
Total bins capacity | Tons |
12.8 |
19.2 |
19.2 |
|
Weighing unit | Aggregate hopper capacity | kg |
1250 |
2000 |
2000 |
Filler hopper capacity | kg |
200 |
300 |
300 |
|
Bitumen hopper capacity | kg |
150 |
225 |
225 |
|
Mixer unit | Type | Twin shaft hot oil jacketed | |||
Mixer capacity | kg |
1000 |
1500 |
2000 |
|
Bitumen pump capacity | Litres/min |
460 |
800 |
800 |
|
Pollution control unit | Primary type | Centrifugal double cyclone | |||
Secondary – Bag house filter type | Reverse air flow | ||||
Filter area | m2 |
230 |
330 |
330 |
|
# Options available on request | |||||
ACCESSORIES | |||||
Filler Silo | Reclaimed filler silo capacity | m3 | 14 / 23 | ||
Foreign filler silo capacity | m3 |
Jul-18 |
|||
Bitumen Tanks | Heating type | Thermic oil heating | |||
Capacity | kL | 15 / 25 / 30 / 50 | |||
Thermic Oil Heater | Capacity | kcal/hr | 200,000 / 300,000 / 500,000 | ||
Hot Mix Storage Silo | Capacity | m3 | 11 (inline silo), 44–83 (skip silo) | ||
Control System | Type | PLC-controlled with HMI | |||
Additional features | SCADA with computer | ||||
* Plant capacity rated at: | 3 % moisture content in cold aggregates " | ||||
Aggregate density of 1.6 ton/m3 " | |||||
Mean sea level " | |||||
Ambient temperature of 30 °C " | |||||
Hot mix temperature of 150 °C " | |||||
Specifications are subject to change without prior notice. Accessories shown are optional and not part of standard supply. |